Comparison between ordinary oil filter and vacuum oil filter


Ordinary Oil Purification Machine is a mobile device composed of a filter bed, oil pump, and coarse filter.

the oil filter is featured to prevent contaminants from the engine oil without interrupting the lubricating process. oil filters are applicable in different types of hydraul

.

Ordinary oil filter

 

Ordinary Oil Purification Machine is a mobile device composed of a filter bed, oil pump, and coarse filter.

the oil filter is featured to prevent contaminants from the engine oil without interrupting the lubricating process. oil filters are applicable in different types of hydraulic machinery.

 

The device is used in internal combustion engines both on- and off-road motor vehicles. The great importance of oil filters in modern combustion engines that allow first-class lubrication for seamless operation.

 

An oil filter is a mechanical device that removes contaminants, dirt, and unburned fuel from circulating. The component allows just the circulation of fresh oil into the engine and it keeps the dirt. This is why the oil filter needs to be treated or change within some period of time.

 

an oil filter is equipped on other vehicle hydraulic systems, such as automatic transmissions, and power steering. Gas turbine engines, such as jet also uses oil filter. The dirty oil is imported from the center and filtered through the filtration chamber to extract clean oil from another corresponding channel of the filter plate.

 

Vacuum Oil Purifier

vacuum oil filter can efficiently remove the free water and solid pollutants in oil-based products such as hydraulic oil, lubricating oil, gas turbine oil, and so on.

 

The oil filter can remove free water in the medium through the process of demulsification, coalescence, and separation. The content of free water in the treated medium is less than 200PPM, and the limit is less than 100PPM. It can also filter out solid particles in the medium. Control oil cleanliness can achieve the filter medium of solid particles. Control the cleanliness of oil, can reach the NAS4 pole or higher. (note: the equipment is not suitable for low water requirements, such as removal of dissolved water. One solution at this point is to use the production series of coaled-negative pressure oil filters, which quickly remove large amounts of water from the oil and eventually reduce the water content to 100PPM or less than 5PPM at the limit.

 

63 Views

Comments